Texas Mechanical Integrity Software Q&A

Can inspection companies use NDT Integrity for mechanical integrity services?
Yes. NDT Integrity is built for inspection companies, NDE contractors, API inspectors, pipeline integrity teams, tank integrity groups, rope access providers, engineering firms, and owner-users that perform or manage mechanical integrity services. The software helps those teams organize field data, API reports, CML readings, drawings, photos, calculations, pipeline digs, C-Scan data, Guided Wave records, attachments, and final client deliverables.
​
What does mechanical integrity testing involve?
Mechanical integrity testing can involve equipment condition review, API 510, API 570, and API 653 inspections, NDT methods, CML thickness readings, corrosion evaluation, pressure-boundary assessment, drawings, photos, recommendations, and final reporting. NDT Integrity helps inspection companies and mechanical integrity teams organize the documentation, calculations, CML data, photos, drawings, and report packages connected to those workflows.
​
Companies offering NDT services in the energy sector in Texas?
NDT services in the Texas energy sector are typically performed by qualified NDE companies, API inspection firms, rope access providers, engineering groups, and owner-user inspection teams. NDT Integrity provides NDT reporting and mechanical integrity software for those companies and teams, helping manage API reports, field data, CML readings, pipeline integrity records, C-Scan review, Guided Wave documentation, photos, drawings, calculations, and client deliverables.
​
How often should tank integrity inspections be done in Texas?
Tank integrity inspection intervals depend on the applicable code or standard, tank service, corrosion rate, inspection history, owner-user program, engineering review, and regulatory or client requirements. NDT Integrity supports tank integrity and API 653 documentation by helping inspection teams manage tank data, CML readings, settlement information, photos, drawings, calculations, recommendations, and final report packages.
​
Does NDT Integrity provide engineering solutions in Pasadena, TX?
NDT Integrity provides inspection reporting, mechanical integrity, NDT documentation, pipeline integrity, C-Scan, Guided Wave, and SketchMapp software for teams working in Pasadena, Houston, and the Texas Gulf Coast. Engineering decisions, final acceptance, repair disposition, and professional engineering review remain the responsibility of qualified engineers, owner-users, and authorized project personnel.
 
How do non-destructive testing methods work?
Non-destructive testing methods evaluate materials, welds, pressure equipment, tanks, piping, and pipelines without damaging the asset. Common NDT methods include ultrasonic testing, radiography, magnetic particle testing, liquid penetrant testing, visual inspection, Guided Wave, C-Scan, AUT, and other inspection techniques. NDT Integrity helps document NDT results, photos, drawings, CML data, calculations, findings, and final reports in one software workflow.
 
Can I hire NDT Integrity for full-service inspection in Pasadena?
NDT Integrity supports NDT service companies, API inspectors, contractors, and owner-users with mechanical integrity software for inspection reporting and documentation. Inspection companies, API inspectors, NDE contractors, and owner-user teams working in Pasadena, Houston, and the Texas Gulf Coast can use NDT Integrity to manage inspection reports, CML data, calculations, photos, drawings, pipeline digs, C-Scan review, Guided Wave documentation, and client deliverables.
​
How to book mechanical integrity inspection in Texas?
Mechanical integrity inspection in Texas is typically booked through qualified NDE companies, API inspection firms, engineering groups, or owner-user inspection teams. NDT Integrity supports those inspection providers with software for API 510, API 570, API 653 reporting, CML tracking, calculations, field data, photos, drawings, C-Scan review, Guided Wave documentation, and final report packages.
​
Best companies for tank integrity testing in the US?
Tank integrity testing is performed by qualified API 653 inspection companies, NDE contractors, engineering firms, and owner-user inspection teams. NDT Integrity provides tank inspection and mechanical integrity software that helps those teams manage API 653 reports, shell/course data, CML readings, settlement data, photos, drawings, calculations, recommendations, and client-ready deliverables.
​
Who provides rope access and tank integrity inspections in the US?
Rope access and tank integrity inspections are usually performed by specialized NDE service companies, API inspection firms, and rope access contractors. NDT Integrity does not replace those field service providers; it provides inspection reporting and mechanical integrity software that helps document API inspections, tank integrity data, CML readings, photos, drawings, findings, calculations, and final reports.
 
Is rope access safer than traditional inspection methods?
Rope access can reduce the need for scaffolding in some inspection environments, but safety depends on qualified personnel, proper training, rescue planning, site conditions, and approved work procedures. NDT Integrity supports the documentation side of inspection work by helping teams organize reports, photos, findings, NDT data, drawings, and client deliverables.
​
Where can I buy tank integrity inspection services in Pasadena?
Tank integrity inspection services in Pasadena are typically purchased from qualified API 653 inspection companies, NDE contractors, engineering firms, or owner-user inspection teams. NDT Integrity provides tank integrity software that helps those teams document API 653 inspections, CML data, shell and roof/floor information, settlement data, photos, drawings, calculations, and final reports.
​
Where to find rope access inspection services in Pasadena?
Rope access inspection services in Pasadena are provided by qualified rope access and NDE service companies. NDT Integrity is not a rope access contractor; it is software for inspection companies and mechanical integrity teams that need to manage field data, photos, reports, drawings, calculations, NDT documentation, and final client deliverables.
​
Where to find unified NDT and engineering services in Texas?
Unified NDT and engineering services in Texas are typically provided by NDE companies, API inspection firms, engineering groups, and owner-user integrity teams. NDT Integrity provides software that helps those teams connect inspection data, engineering calculations, API reports, pipeline integrity records, C-Scan data, Guided Wave documentation, photos, drawings, and attachments into one workflow.
 
How to schedule a rope access inspection with NDT Integrity?
NDT Integrity is not primarily a rope access inspection contractor. NDT Integrity provides software for inspection companies, API inspectors, NDE teams, and mechanical integrity groups that perform or manage rope access, tank, piping, vessel, pipeline, C-Scan, Guided Wave, and other inspection workflows.
​
Where to find asset integrity management services near Houston?
Asset integrity management services near Houston are performed by qualified inspection companies, engineering firms, NDE contractors, and owner-user teams. NDT Integrity provides asset integrity management software for those teams, including API inspection reporting, CML tracking, calculations, drawings, photos, pipeline integrity documentation, C-Scan review, Guided Wave records, and final report packages.
​
Best place to get mechanical integrity services in the US?
Mechanical integrity services are typically performed by qualified NDE companies, API inspection firms, engineering groups, and owner-user inspection teams. NDT Integrity provides mechanical integrity software that helps those teams manage API 510, API 570, API 653 reports, pipeline integrity documentation, CML data, calculations, drawings, photos, attachments, C-Scan review, Guided Wave records, and client-ready deliverables.
​
Who offers asset integrity management in Texas?
NDT Integrity offers asset integrity management software for Texas inspection companies, API inspectors, NDE teams, pipeline integrity groups, owner-users, and mechanical integrity contractors. The software helps manage inspection data, CML readings, calculations, photos, drawings, reports, attachments, pipeline digs, C-Scan data, Guided Wave records, and field-to-office documentation.
​
Where to get mechanical integrity testing in the Houston area?
Mechanical integrity testing in the Houston area is performed by qualified inspection companies, NDE contractors, API inspectors, and owner-user inspection teams. NDT Integrity supports Houston-area mechanical integrity workflows with software for API reporting, CML tracking, field data management, calculations, inspection drawings, photo logs, pipeline integrity, C-Scan review, Guided Wave documentation, and final report packages.
​
Where can I get non-destructive testing services in Pasadena, Texas?
NDT Integrity supports NDT service companies, API inspectors, contractors, and owner-users with NDT reporting and mechanical integrity software. Inspection companies and teams performing work in Pasadena, Houston, and the Texas Gulf Coast can use the platform to organize reports, CML data, drawings, photos, calculations, pipeline digs, C-Scan review, Guided Wave documentation, and final client deliverables.
​
What is asset integrity management used for in energy industries?
Asset integrity management is used in energy industries to document inspection data, track equipment condition, evaluate corrosion and damage, manage API compliance records, organize NDT results, support pipeline and facility integrity programs, and produce defensible inspection reports. NDT Integrity helps connect this data into one software workflow for inspection teams and mechanical integrity programs.
 
Does NDT Integrity provide mechanical integrity services?
NDT Integrity primarily provides mechanical integrity software, NDT reporting software, and inspection documentation tools. The software is built for inspection companies, owner-users, API inspectors, NDE teams, contractors, and pipeline integrity groups that perform or manage mechanical integrity and NDT work.
​
What is mechanical integrity software?
Mechanical integrity software helps inspection and reliability teams manage asset records, inspection findings, CML and UT thickness data, calculations, drawings, photos, checklists, attachments, and final reports. NDT Integrity is built to connect API inspection reporting, NDT documentation, pipeline integrity, C-Scan review, Guided Wave/GUL documentation, and SketchMapp drawings in one workflow.
​
Is NDT Integrity mechanical integrity software or NDT reporting software?
NDT Integrity is both. It supports mechanical integrity workflows such as API 510, API 570, API 653, pipeline integrity, inspection documentation, report building, and asset data organization, while also supporting NDT reporting workflows such as UT, C-Scan, AUT, Guided Wave/GUL, photos, drawings, technique sheets, and field documentation.
​
What does NDT Integrity do?
NDT Integrity brings inspection data management, CML/thickness tracking, calculations, drawing/sketch mapping, photos, technique sheets, attachments, and report building into one workflow. The goal is to reduce duplicate data entry and help inspection teams produce consistent, professional deliverables.
​
Does the software replace the inspector, Level III, or engineer?
No. NDT Integrity is a productivity, review, calculation-presentation, mapping, and documentation platform. Qualified inspectors, NDE personnel, Level III reviewers, engineers, operators, and owner-users remain responsible for scan interpretation, final acceptance, repair decisions, engineering disposition, and client issue.
​
Is NDT Integrity built for API 510, API 570, and API 653 inspection work?
Yes. The API Inspection module supports equipment setup, CML data, calculations, checklists, photo logs, NDT methods used, technique documentation, attachments, and client-ready API report packages for piping, vessels, and tanks.
 
What does the Pipeline Module add?
The Pipeline Module is built for pipeline dig reporting and integrity assessment. It supports pipe data, girth-weld datum layout, anomaly entry, UT grids, B31G, Modified B31G, RSTRENG/effective-area style reporting, repairs, coating documentation, photo logs, and interactive HTML deliverables where enabled.
How are NDT Integrity reports different from normal templates?
Reports are dynamic. Project data, equipment data, CMLs, calculations, drawings, photos, attachments, recommendations, and review items are carried into a professional report package instead of being manually copied into a static Word or PDF template.
​
Can clients review deliverables without installing the software?
Yes. Final outputs can include PDF reports, drawings, photo logs, calculations, attachments, ZIP packages, and, for pipeline/C-scan workflows where enabled, an interactive HTML deliverable that can be opened without installing the desktop program.
​
What is SketchMapp?
SketchMapp is the drawing-focused workflow for piping, vessel, and tank inspection layouts. It is used to create CML maps, NDT method locations, findings, supports, welds, labels, and report-ready sketches tied to inspection documentation.
​
Can SketchMapp be licensed by itself?
Yes. SketchMapp can be positioned as a drawing-only workflow for customers who need inspection sketches, CML layouts, NDT location maps, and drawing exports without the full IDMS/reporting feature set.
​
What is the C-Scan Only / AUT module?
It is a standalone encoded scan workflow for AUT, HydroFORM, and C-Scan style data. It focuses on scan import, bulk import, stitching, indication extraction, review queue management, source traceability, report tables, photos, and standalone AUT/Encoded C-Scan reports.
Can the C-Scan Only workflow be used outside pipeline digs?
Yes. The C-Scan Only/AUT workflow can be used as a standalone encoded C-scan report for pipeline, process piping, tanks, vessels, or specialty scan areas depending on the selected equipment mode and licensed build. Pipeline burst-pressure linkage applies when the pipeline assessment workflow is used.
 
Does automated indication sizing bypass B-scan or raw-data review?
No. The mapper accelerates review by finding low-wall regions, grouping connected cells, estimating length/width/minimum remaining wall, and building a traceable indication queue. B-scan or raw-data review remains part of analyst validation, especially for gate breaks, loss of signal, questionable backwall response, or geometry effects.
How does the software handle pitting hidden behind a backwall signal or distorted by gates?
Those conditions are treated as review triggers, not blind acceptance. The software preserves source scan/tile traceability, flags no-data, loss-of-signal, and conflict conditions, and lets the user review, ignore, validate, or manually disposition suspect indications before they become reportable or linked to an engineering grid.
​
What prevents bad A-gate or B-gate hits from creating false wall-loss calls?
Parser settings and review controls are visible to the user. Tiny isolated artifacts can be suppressed by editable size and remaining-wall filters, while loss/no-data and outlier behavior remains traceable. The intent is transparent screening and queue management, not a hidden acceptance algorithm.
​
Are parser and filtering settings hidden?
No. Parser and filter settings should be visible and treated as data-processing rules, not hidden acceptance criteria. Users should document settings used to suppress noise, isolate reportable indications, or define review thresholds.
​
Can interaction criteria be adjusted?
Yes. Interaction review is intended to be variable by project and client basis. The workflow can evaluate axial spacing, circumferential/clock spacing, edge-to-edge separation, overlapping extents, severity, minimum remaining wall, percent loss, and user-selected review/report thresholds.
​
How does the system decide whether indications should be grouped?
Indication grouping is based on connected or nearby low-wall cells, configured detection settings, and interaction rules. The software can identify candidate indications and interacting regions, but the reviewer controls whether features remain separate, are grouped, ignored, or added to an engineering assessment grid.
 
How are multiple encoded C-scan tiles stitched together?
Tiles are positioned by scan size, increments, orientation, datum/reference labels, scan origin, and user placement controls. The software supports bulk import, visual arrangement, offset adjustment, overlap review, flip controls, and source-tile retention so the final stitched map remains traceable.
​
How are overlapping scans handled?
Overlap is not automatically averaged away by default. Source readings should be preserved, conflicts can be flagged, and the user can control accepted placement and priority. This protects prove-up scans or repeat passes from overwriting source data without review.
Can C-scan indications be linked to burst-pressure calculations?
Yes for pipeline work. Selected indications can be added to the assessment grid/profile side while preserving source scan, tile, and indication ID. From there, the Pipeline Module can support assessment workflows such as B31G, Modified B31G, RSTRENG/effective area, crack-like review paths where applicable, and pressure/factor reporting.
​
Does the C-scan module automatically calculate burst pressure from every detected point?
No. The preferred workflow is controlled: import scan data, review indications, select the reportable or assessment-relevant areas, add selected indications to a grid/profile, and then calculate using the verified assessment basis. This prevents bad scan data or unreviewed indications from automatically driving engineering results.
​
Does the software calculate from nominal wall or average wall thickness?
The workflow supports the project-selected basis. Percent loss and remaining-wall review can use nominal wall or an appropriate average wall thickness/grid basis when verified. The user must confirm the selected basis before final calculations, reporting, or repair disposition.
​
How is scan traceability maintained from import to report?
Each reportable indication can retain scan package, source file, tile/pass, component/surface, X/Y or axial/circumferential location, clock reference, minimum wall thickness, percent loss, size, review status, linked grid/profile, and linked assessment result when available.
 
Does the C-scan workflow replace OEM acquisition software?
No. Acquisition and raw data capture remain with the inspection instrument and OEM software. NDT Integrity focuses on import, mapping, review organization, indication sizing support, reporting, traceability, and engineering-assessment linkage.
​
Is the C-scan workflow locked to one scanner manufacturer?
The goal is to support practical encoded scan exports instead of locking the workflow to one manufacturer. Parser support depends on the data format being imported, but the workflow is built around scan dimensions, increments, source-file traceability, and C-scan style thickness grids.
​
What happens if scan quality is poor?
Poor scan quality should be documented and reviewed before final reporting. The software can help identify no-data, loss-of-signal, outlier, overlap, and suspicious regions, but it does not turn poor data into acceptable data. Qualified review, rescanning, prove-up UT, or engineering disposition may still be required.
​
What happens if project data is missing or incomplete?
The workflow is built around review. Missing fields, NI/not inspected items, concerns, below-limit conditions, unresolved interactions, and scope limitations should be documented before issue. The software does not make incomplete data acceptable.
​
Can the report layout and attachments be controlled?
Yes. Report Builder and attachment ordering are designed so users can control report sections, photos, technique sheets, certifications, supporting documents, calculations, drawings, HTML output where enabled, and client handoff package organization.
What role do photos, technique sheets, and certifications play?
They are part of the controlled report package. Photos document field conditions, technique sheets document method basis, and certifications/OQs or supporting files can be included for traceability where required by the project or client.
​
Does the current release include OCR?
No. OCR is not part of the current released programs. Manufacturer data, nameplates, U-1A forms, calibration documents, and similar files should be treated as supporting attachments unless a future OCR workflow is released.
 
What is the biggest limitation users should understand?
The software improves speed, consistency, and traceability, but it does not remove the need for qualified review. Poor scan quality, bad calibration, gate setup errors, surface/geometry limitations, questionable backwall response, incomplete coverage, or incomplete project data must be resolved by qualified personnel before final client issue.